Cents

1. Start by scanning the QR code to access the login screen.

1. Use your unique store credentials to log in.
2. Note: If you’re unsure of your credentials, contact our support team for assistance

Access the Device Provisioning Screen

1. After logging in, you will be directed to the device provisioning screen
2. Key settings, such as fleet, release, and screensaver timeout, are pre-selected for your convenience.

1. Price Fields:
 1. Skip the price fields unless these are GPIO machines. If configuring GPIO machines, enter the pricing based on how much you want to charge per quarter.
2. Device Type:
 1. Choose between Washer or Dryer under the “Type” section.
3. Machine Number:
 1. Enter the machine number.
 2. For replacement machines, add a leading “0" to avoid duplicate errors.
 3. For stacked dryers with two pockets labeled differently, input both numbers.
 1. Example: Dryer1011 (10 = Top Pocket, 11 = Bottom Pocket).
4. Machine Interface and Serial Type
 1. Midas Washer or Dryer: Select Serial and choose Midas.
 2. Serial Centurion Washer or Dryer: Select Serial and choose Centurion.
 3. ACA/Titanium Washer or Dryer: Select Serial and choose ACA.
 4. Dexter C-Series Washer or Dryer: Select Serial and choose Dexter.
 5. Compass Pro/Clarus Vibe Electrolux Washer: Select Serial and choose Electrolux.
 6. MDC/GPIO Centurion Washer or Dryer: Select GPIO and choose Centurion.
 7. A/V/N Legacy Series Dexter Washer or Dryer: Select GPIO and choose Dexter.
 8. Compass Pro Electrolux Dryer: Select GPIO and choose Electrolux
 9. EDC Dryer: Select GPIO and choose Dexter.
 10. Netmaster Washer or Dryer: Select GPIO and choose Centurion.

1. Click Save to apply the changes. The reader will boot up automatically.

1. If any errors are detected, you can return to the provisioning screen to adjust the settings as necessary.

1. Scan the QR Code
 1. Start by scanning the QR code to access the login screen.
2. Log In
 1. Use your unique store credentials to log in.
 2. Note: If you’re unsure of your credentials, contact our support team for assistance
3. Access the Device Provisioning Screen
 1. After logging in, you will be directed to the device provisioning screen
 2. Key settings, such as fleet, release, and screensaver timeout, are pre-selected for your convenience.
4. Configure the Device
 1. Price Fields:
 1. Skip the price fields unless these are GPIO machines. If configuring GPIO machines, enter the pricing based on how much you want to charge per quarter.
 2. Device Type:
 1. Choose between Washer or Dryer under the “Type” section.
 3. Machine Number:
 1. Enter the machine number.
 2. For replacement machines, add a leading “0" to avoid duplicate errors.
 3. For stacked dryers with two pockets labeled differently, input both numbers.
 1. Example: Dryer1011 (10 = Top Pocket, 11 = Bottom Pocket).
 4. Machine Interface and Serial Type
 1. Midas Washer or Dryer: Select Serial and choose Midas.
 2. Serial Centurion Washer or Dryer: Select Serial and choose Centurion.
 3. ACA/Titanium Washer or Dryer: Select Serial and choose ACA.
 4. Dexter C-Series Washer or Dryer: Select Serial and choose Dexter.
 5. Compass Pro/Clarus Vibe Electrolux Washer: Select Serial and choose Electrolux.
 6. MDC/GPIO Centurion Washer or Dryer: Select GPIO and choose Centurion.
 7. A/V/N Legacy Series Dexter Washer or Dryer: Select GPIO and choose Dexter.
 8. Compass Pro Electrolux Dryer: Select GPIO and choose Electrolux
 9. EDC Dryer: Select GPIO and choose Dexter.
 10. Netmaster Washer or Dryer: Select GPIO and choose Centurion.
5. Save and Finalize
 1. Click Save to apply the changes. The reader will boot up automatically.
6. Make Corrections if Needed
 1. If any errors are detected, you can return to the provisioning screen to adjust the settings as necessary.