Cents

Euri

Install, run, and troubleshoot Penny and Pulse machine payment devices.

Cents Connect (Penny & Pulse)

Set up your network to install Penny and Pulse devices in your laundromat using the access point and UDM router you received from Cents.

How to Set Up Your Cents Connect Network (VLAN)

Did you receive a UDM device to help you power your Cents program? Learn how to connect it here!

How to Connect a UDM Router to Your Cents Network

Add a networked machine in the Cents Business Manager under Equipment by pairing an unpaired Cents device.

How to Create a Networked Machine in the Business Manager

Provision a new Penny by scanning the QR code it shows at power up and entering the machine settings.

How to Provision a Penny Device

How to Configure a Penny to a Machine via QR Code

Rescan a provisioned Penny's power up QR code to check or change its machine configuration.

How to Change the Configuration of a Provisioned Penny Device

Reveal a Penny's MAC address by tapping the machine number in the top-left corner of the screen repeatedly.

How to Find Your Penny's MAC Address

Identify whether your Alliance, SpeedQueen, or Huebsch machine is ACA, Titanium, Midas, Centurion, MDC, or EDC before configuring Penny.

How to Identify Your Alliance Machine Era

Set Midas, Centurion, and ACA controls to accept card payment commands using menu settings, DIP switches, or jumper plugs.

How to Enable Serial Mode on Alliance Machines

Use the Cents IDC splices correctly on 18-22 AWG wires, with a short video showing full seating.

How to Splice Wires with IDC Splices

Set up your Cents Connect network and provision and configure devices.

Network & Device Setup

The four steps common to every Penny install, covering materials, mounting, provisioning, and where to find machine specific guides.

Penny General Install Guide

Mount a Penny over a removed coin drop using the coin drop blocking mounting plate and its four studs.

Penny Coin Drop Blocking Mounting Plate Install Guide

Connect and configure the Imonex digital coin drop on Alliance machines that accept quarters plus tokens or dollar coins.

Alliance Imonex Digital Coin Drop Setup Guide

Mount Penny devices on SpeedQueen and Huebsch top-loaders using the top-loader bracket, with materials and hole placement.

Alliance (SpeedQueen/Huebsch) Top-Loader Bracket (Penny) Install Guide

Wiring and parts for installing Penny on Alliance ACA machines, also called Quantum Gold, MDC2, and Galaxy 600.

Alliance ACA (Penny) Install Guide

Wiring steps for installing Penny on Alliance EDC dryers using the 3-pin coin connector and tapped 24VAC power.

Alliance EDC Dryer (Penny) Install Guide

Wiring and parts for installing Penny on Alliance MDC and Centurion machines, sold under the Quantum Control label.

Alliance MDC/Centurion (Penny) Install Guide

Wiring steps for installing Penny in pulse only mode on older Alliance NetMaster machines, identified by model number digits.

Alliance NetMaster (Penny) Install Guide

Wiring and parts for installing Penny on Alliance Titanium machines, also sold as Platinum and Quantum Gold.

Alliance Titanium (Penny) Install Guide

Wiring and parts for installing Penny on Dexter C-Series washers and single or stacked dryers.

Dexter C-Series Washer and Dryer (Penny) Install Guide

Wiring and configuration steps for installing Penny on coin pulse only Dexter A-Series, V-Series, and stacked dryer machines.

Dexter Coin GPIO (Penny) Install Guide

Wiring steps for installing Penny on pre C-Series Dexter machines in coin pulse only mode, with no machine state reporting.

Dexter Legacy (Penny) Install Guide

Wiring and parts for installing Penny on Electrolux Compass Pro and Clarus Vibe washers and dryers.

Electrolux (Penny) Install Guide

Wiring and parts for installing Penny on Alliance Midas machines, also known as Quantum Touch and Galaxy Touch.

Midas (Penny) Install Guide

Penny Install Guides

Harness, power, and coin drop connections for installing Pulse on Alliance ACA washers.

ACA Washer and Dryer (Pulse) Install Guide

Wiring and configuration steps for installing Pulse on Centurion washers, including the coin drop connection.

Centurion Washer (Pulse) Install Guide

Wiring steps for installing Pulse on Dexter C-Series washers using the SERIAL COM header and 30-00963 harness.

Dexter C-Series Washer and Dryer (Pulse) Install Guide

Wiring steps for installing Pulse on pre C-Series Dexter machines in coin pulse only mode, without machine state reporting.

Dexter Legacy (Pulse) Install Guide

Wiring steps for installing Pulse in GPIO mode on SpeedQueen and Huebsch Centurion and NetMaster machines.

MDC/Centurion (Pulse) Install Guide

Wiring steps for installing Pulse on Alliance MDC and NetMaster dryers using the 24VAC to 12VDC adapter.

MDC/NetMaster Dryer (Pulse) Install Guide

Harness, power, and coin drop connections for installing Pulse on Alliance Midas washers.

Midas Washer and Dryer (Pulse) Install Guide

Pulse Install Guides

Pair machine QR code stickers using the 4-digit code so customers can pay with Apple Pay and Google Pay.

How to Pair QR Code Stickers to Your Machines

Read a machine's cycle pricing and modifiers on the Pricing &amp; Settings tab, including what shows when data cannot be retrieved.

Understanding the Pricing & Settings Tab

Find available machines and start a wash or dry from the Machines menu in the Employee App.

How to Run a Machine from the Employee App or Business Manager

Assign washers and dryers to a wash and fold order during processing in the Cents Employee App.

How to Run a Machine for a Wash & Fold Order in the Employee App

Extend a running machine cycle from the Employee App using the Add time screen.

How to Add Time to an Existing Cycle

Change the number shown in the top left corner of your device screen if it does not match the machine number.

How to Change the Machine Number on a Paired Penny Device

Update device pricing to match the machine vend price on non-serial washers such as Dexter A-Series, V-Series, and N-Series.

How to Change the Price of a Non-Serial Washer or Dryer

Clear coin totals and review the Coin Ledger in Business Manager, for stores running Penny devices.

How to Do a Bulk Coin Collection (Business Manager or Employee App)

Start machines from the Business Manager or Employee App and change machine prices.

Run Machines & Set Prices

The four turn types your machines record, and the payment details that tell them apart.

Understanding Turns & Machine Payments

What each Cents Connect machine report covers, from advanced processing breakdowns to machine turn details.

Understanding Your Cents Connect Reports

How Cents Connect Machine Metrics Are Calculated

See the homepage experience self-serve customers get when they pay for machines by scanning a QR code.

How QR Code Machine Payments Work for Self-Serve Customers

Refund a Penny self-serve transaction in Worldnet by finding it under Reporting and Closed Batch.

How to Refund a Self-Serve Transaction on a Penny Device

Submit the signed Account Change Form and supporting documents to update the bank account used for Penny deposits.

How to Update Bank Deposit Information for Penny Devices

How self-serve payments, turns, refunds, and Cents Connect reports work.

Machine Payments & Reports

First steps to try on a Penny that stops working, plus the machine details Cents Support needs from you.

Penny FAQs and Troubleshooting

Replace a Penny EMV module damaged by vandalism or liquid, using T10 and T8 drivers and a module requested from Cents.

How to Replace an EMV Module on a Penny

Troubleshoot a store's Unifi network from the Cents Site Manager after VLAN setup, checking access points and connected devices.

Unifi Network Troubleshooting

Troubleshooting & FAQs

No tickets or conversations found

Try selecting a different creation date range.

Tickets and conversations you've started through the messenger will appear here.

No tickets or conversations created by you

Try using different keywords or checking for typos.

Try selecting a different update date range.

Find answers and get help from Intercom Support and Community Experts

Conversations you've started through the messenger will appear here.

No conversations created by you

No conversations found

AI title

Title

This site employs cookies and other technologies that we and our third party vendors use to monitor and record personal information about you and your interactions with the site (including content viewed, cursor movements, screen recordings, and chat contents) for the purposes described in our Cookie Policy. By continuing to visit our site, you agree to our {websiteTermsLink}, {privacyPolicyLink} and {cookiePolicyLink}.

This site uses cookies and similar technologies ("cookies") as strictly necessary for site operation. We and our partners also would like to set additional cookies to enable site performance analytics, functionality, advertising and social media features. See our {cookiePolicyLink} for details. You can change your cookie preferences in our Cookie Settings.

We use cookies to make our site work and also for analytics and advertising purposes. You can enable or disable optional cookies as desired. See our {cookiePolicyLink} for more details.

Advertising cookies are set by our advertising partners to collect information about your use of the site, our communications, and other online services over time and with different browsers and devices. They use this information to show you ads online that they think will interest you and measure the ads' performance. Social media cookies are set by social media platforms to enable you to share content on those platforms, and are capable of tracking information about your activity across other online services for use as described in their privacy policies.

These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

These cookies are necessary for the website to function and cannot be switched off in our systems.

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site.

You have the right to opt out of the sale of your personal information. See our {cookiePolicyLink} for more details about how we use your data.

Your Privacy Choices

We use cookies to enhance your experience. You can customize your cookie preferences below. See our {cookiePolicyLink} for more details.

Cookie Settings

Empty Help Center

Uh oh. That page doesn’t exist.

Home

Search results

Disappointed

Neutral

Smiley

Thinking...

Searching through sources...

Analyzing...

Tickets submitted through the messenger or by a support agent in your conversation will appear here.

No tickets created by you

No tickets found

Conversations and tickets in {topic}

Conversations and tickets in {topic} // {subtopic}

Volume, creators and topics for your company.

Insights

Top creators

AI topics

Track the progress of all tickets and conversations related to your company.

Customer Portal.

Track the progress of all tickets related to your company.

Tickets portal.

{assigneeName} needs more information from you

Tickets

No access to tickets portal

You're not signed in on this browser. Sign in through this site's Messenger, then reload this page.

Sign in to view your company's tickets

Search

Skip the search. Describe what you’re trying to do and get a grounded answer.

Browse articles and guides in this topic.

Create your workspace and invite the people you work with.

Set up your account

Build your first workflow and watch it run end to end.

Ship something

Connect the tools your team already uses to bring data in.

Connect your stack

A quick lap of the product so you know where everything lives.

{appName} in 60 seconds

This prototype demo is aware that you are reading “{title}”. It can point you back to the current article, but a production article-aware Fin contract is still follow-up work.

Prototype article-aware answer

Because you already asked about invitations, this prototype demo can add the follow-up: use the role selector before sending each invite to limit access to the teammate responsibilities.

Prototype role-limiting follow-up

This prototype demo suggests starting with your workspace profile, inviting the team members who need access, and then connecting the integrations you use.

Prototype getting-started answer

In this prototype demo, integrations are configured from workspace settings. Choose the integration, connect the account, and review the enabled permissions.

Prototype integrations answer

In this prototype demo, invite teammates from workspace settings, then choose the access each teammate needs before sending the invitation.

Prototype invite-team answer

This prototype demo does not have a scripted answer for that question yet. Try asking how to invite your team or open a source article. No production Fin API was called.

Prototype answer unavailable

I’ve got this page open. Ask me anything about it and I’ll answer from the docs.