If you have provisioned a Cents Penny device and either want to validate the configuration selected or change it, follow the below instructions.
Using the same overall flow as during provisioning, scan the QR code that the device shows upon power up. Power cycle the device in order to trigger this QR code to be displayed.
After scanning, use the login that you used when installing devices in this store. If you have installed devices in multiple stores, ensure that you use the correct login for the store you are in. Please contact Cents support if you have questions.
RED ARROW: Change the configuration of the device as a washer or a dryer.
BLUE ARROW: Change the machine number.
ORANGE ARROW: Change the machine interface:
SERIAL or GPIO
ACA, MIDAS, DEXTER, etc.
GREEN ARROW: Change the price of the machine. Relevant only to GPIO configurations.
Note that if "Other" is selected, the first user input box will be price and the second will be minutes per quarter.
Click "Save Changes" and the device will reboot and the changes will take affect.