This installation covers Speed-Queen/Huebsch washers with B-micro with "A" controls. The model number of these machines is SCxxAC or HCxxAC. The reader uses a single pulse control to start the machine.
Parts
Reader
Cable harness
Power supply adapter for the reader
Installation
Set the machine type and number using the DIP switch on the back of the card reader.
See DIP switch settings page for more info.
Turn machine power OFF!
Remove coin drop
Start wires
The connection is to the Coin1 input. Splice the White and Green wires from the harness to the White and Red wires from the coin drop (or to wires coming off of J22-2-7 and J22-2-5).
Power
Splice the AC-side of the 12V power adapter to the power terminal block (110V or 220Vac). Connect the DC side of the 12V power supply to the red (+ive) and blue(-ive) wires on the cable harness
Secure the reader to the machine and power up the machine
Activate the reader using the store's Activation Card:
Vend Prices
The reader sends a single pulse. Configure the washer to start off a single pulse (i.e configure the value of a pulse to equal the cycle cost, or set cycle cost to one quarter). Set the reader vend prices on the LaundroPortal