Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended that you place number labels on each washer and dryer machine.
​

Set the DIP switch to number the reader. See Reader DIP Switch settings
​

Power connection
Connect the small 2-pin connector to the mating connector for power
​

​
​

Signal connection
Splice the White wire from the reader cable harness to the white wire from the coin-drop. Splice the Green wire from the harness to the green wire from the coin-drop. You may need to cut the White/Green reader wires from the unused 7-pin connector in which.
​

​
​