The NT-1228BL is the wireless barcode scanner we recommend for the Cents Employee App. Use it to scan machine QR codes, product barcodes, and order tickets on your Sunmi tablet. This article covers picking a connection mode and pairing the scanner with the Cents Employee App.
If the scanner is already set up but isn't working, see:
How to troubleshoot your NT-1228BL Barcode Scanner.
Amazon link for the NT-1228BL Barcode Scanner
NT-1228BL Bluetooth 2D Handheld Barcode Scanner Product Specifications
NT-1228BL User Manual
When to use:
You just unboxed a new NT-1228BL.
You're moving the scanner to a different Sunmi tablet.
You want to switch how the scanner connects (USB dongle, Bluetooth, or wired).
Before you start, you'll need:
The scanner, the included USB cable, and the small USB dongle (the little receiver stick).
Your Sunmi tablet (T2s, M2 Max, T3, or another model running the Cents Employee App).
The Quick Start Guide that came in the box — a few of the setup barcodes live there.
Set up the scanner for the Cents Employee App
Pick a connection mode
There are three ways to connect the scanner to a Sunmi tablet. Pick one based on your setup:
Wireless (USB dongle) — our default for Sunmi. Plug the included USB dongle into the Sunmi, scan the RF 2.4G Transport barcode in the Quick Start Guide, and you're paired. Fast, reliable, no cable to deal with. Best for most stores.
Bluetooth. No dongle needed. Scan the Bluetooth Transport barcode in the Quick Start Guide, then open the Sunmi's Bluetooth settings and pair with the scanner. Use this if the Sunmi's USB port is already taken.
USB cable (wired). Plug the USB cable from the scanner directly into the Sunmi. No pairing needed. The scanner acts like a wired keyboard. Use this only if the first two options fail.
Note: The scanner auto-switches between wired and wireless by default — when the USB cable is plugged in, it uses the cable; when you unplug it, it goes back to wireless.
Charge the scanner for at least 30 minutes. Half-charged scanners behave strangely.
Place the scanner on its base.
Scan Restore Factory Default (in the Quick Start Guide) to clear any previous settings.
Pick a connection mode and run its setup:
Wireless (recommended): plug the dongle into the Sunmi, then scan RF 2.4G Transport in the Quick Start Guide.
Bluetooth: scan Bluetooth Transport in the Quick Start Guide, then pair from the Sunmi's Bluetooth settings.
Wired: plug the USB cable from the scanner into the Sunmi — no barcode needed.
Scan Trigger Mode. This tells the scanner to only read when you press the trigger (so it doesn't scan things by accident).
6. Scan CR Terminator. This tells the scanner to press "Enter" after each scan so the Employee App commits the value and moves on.
8. Check the Sunmi's scanner settings. On the Sunmi, open Settings → System → Scan code and Keyboard. Pick the scanner (it's usually listed as USB keyboard), set the device type to Scanner, and turn on Broadcast Output.
Test it. Open the Employee App, tap into any search or text field, and scan something. The scanned text should appear in the field and commit on its own.
Video Walkthrough
Watch the short video for your Sunmi model to see what the final setup looks like, then follow the steps below to walk through it
Sunmi T2s:
Sunmi M2 Max:
Need assistance?
Feel free to text our Cents Support team at 888-302-8809.




