The Imonex digital coin drop is used for various situations requiring multiple coin types on a single input (quarters and tokens, quarters and dollar coins, etc.)

The Imonex drop has a 4-pin Molex MiniFit Jr. connector. An adapter specific to the machine type is connected at this location. Check with Cents and Imonex to ensure that you have the correct harness adapter part number.

Alliance machines use the 0003096 adapter. Note that this adapter has a female 3-pin connector and a female 2-pin connector.

Connect the female 3-pin connector on the 0003096 adapter to the male 3-pin connector on the Cents 30-01023 harness. To power the coin drop, the 2-pin female connector on the 0003096 adapter will be used. Depending on the machine situation, it may be necessary to cut off this connector and simply use the wire ends to splice into other power sources. These coin drops accept 12-24 VAC/VDC power input.

Electrolux machines use the 0003116 adapter. Note that this adapter has a female 3-pin connector and two bare wires for splicing or use with terminal block connectors.